Starter Set HW v4.9-NIA
Description Starter Set HW v4.9 is a precise indoor positioning and navigation solution for various applications including autonomous robots, autonomous drones, autonomous vehicles. It also works...
Power your robot
2020 NEW UPGRADE
Special battery for
high-performance quadruped robot
Battery Parameters | |
Product model: AL01-BTO1 Battery type: Polymer lithium ion battery Rated capacity: 12600mAh 317.52Wh Product size: 160*75*165mm |
Nominal voltage: 25.2V Charging limit voltage: 29.4V Maximum charging power: 352.8W Product quality: 2740g |
STABLE AND SAFE
STRONG BATTERY LIFE
The high-energy and high-voltage battery specially customized for Aliengo uses polymer lithium-ion power cells with a rated capacity of up to 317.52Wh. It provides 2.5-4.5 hours of robot battery life and meets all the requirements for the routine operation of robots.
The intelligent battery management system (BMS) is supported to monitor the battery status at all times to ensure stable and safe operation.
Core Technology Eight Focuses
Intelligent Li-ion Battery Management System
Temperature protection |
Hardware protection |
Reset protection |
Overcharge protection |
Circuit protection |
Output protection |
Overvoltage protection |
Battery protection |
Excellent craftsmanship
Brilliant design
16 other products in the same category:
Description Starter Set HW v4.9 is a precise indoor positioning and navigation solution for various applications including autonomous robots, autonomous drones, autonomous vehicles. It also works...
+ Edge CPU for SPOT Spot CORE provides dedicated processing for applications requiring on-robot computation. PRODUCT HIGHLIGHTS The Spot CORE is an additional processor for developers to run...
+ Lidar for SPOT Spot EAP enhances the range and accuracy of Spot’s autonomy system for use on large sites. PRODUCT HIGHLIGHTS The Spot EAP (Enhanced Autonomy Package) improves Spot’s autonomy...
SPOT Battery Additional Spot Battery WHAT'S INCLUDED • Spot battery SPECS Length = 324 mm (12.8 in) Width = 168 mm (6.6 in) Height = 93 mm (3.7 in) Weight = 4.2 kg (9.3 lbs) Capacity...
+ Ports for SPOT Spot GXP provides regulated power and an Ethernet port for easy payload integration. PRODUCT HIGHLIGHTS The Spot GXP (General Expansion Payload) jump-starts payload integration...
+ Inspection for SPOT Spot CAM+ adds a pan-tilt-zoom (PTZ) camera to the Spot CAM to enable detailed inspections. PRODUCT HIGHLIGHTS The Spot CAM+ payload turns Spot into a powerful inspection...
A1 Motor Stable and efficient, easy to maintain FUNCTION PARAMETER Maximum Torque 33.5N.m Weight about 605g Operating Voltage 12~30V (Recommended Voltage:24V) Maximum Current 40A...
SPOT Front/Rear Panels Set of additional front and rear panels WHAT'S INCLUDED • Front Panel • Rear Panel
Description Not for new design. We are shipping out the last beacons from the last batch. The Beacons HW v4.9 are replaced with Super-Beacons. Beacon HW v4.9 with 9D IMU onboard...
A1 Battery Power your robot High-Performance RobotDedicated BatteryGreater Current And Power, More Reliable And Safer, Smarter BMS Battery Parameters Product: Al Robot Dedicated...
Waterproof Robot Joint B1-16 Weight Max Torque Protective 1500g 140.00N.m IP67 Working voltage: 20 - 40V Torque constant: 3.38n.m/a Motor encoder...
Description Beacon Mini-TX a mini version of regular Beacon HW v4.9 with IMU Has 6D IMU onboard: 3D accelerometer + 3D gyroscope Comparison to Beacon HW v4.9: TX-only beacon – can transmit...
SPOT Charger Additional Spot charger WHAT'S INCLUDED • Spot charger SPECS Length = 191 mm (7.5 in) Width = 305 mm (12.0 in) Height = 152 mm (6.0 in) Weight = 4.8 kg (10.5 lbs)...
Description Not for a new design. We are shipping out the last modems from the last batch. The Modems HW v4.9 are replaced with Modem HW v5.1. Modem is a central controller of the...
Description Outdoor version of the Mini-RX beacon. Electronics is fully compound-sealed. Ultrasonic sensor is protected by special IP67 membrane. Reset button is sealed and not available. USB...
AlienGo Battery