Beacon Mini-RX-IP67
  • Beacon Mini-RX-IP67
  • Beacon Mini-RX-IP67
  • Beacon Mini-RX-IP67
  • Beacon Mini-RX-IP67
  • Beacon Mini-RX-IP67

Beacon Mini-RX-IP67

zł1,003.38
Tax included
0 review(s)

Ask about product

Ask about product

Beacon Mini-RX-IP67

Beacon Mini-RX-IP67

Please fill below informations. Customer service will contact with You soon as is possible.

* Required fields

Cancel or 

Description

Outdoor version of the Mini-RX beacon. Electronics is fully compound-sealed. Ultrasonic sensor is protected by special IP67 membrane. Reset button is sealed and not available. USB connector is not protected. Produced on request. Lead time – 3-5 days.

The Mini-RX Beacon can be used in both the Non-Inverse Architecture (NIA) and the Inverse Architecture (IA):

Supports license-free 915MHz ISM band (US) and license-free SRD band 868MHz (EU).

All Mini-RX beacons have 6D IMU (gyro+accelerometer) onboard.

The Mini-RX beacon differs from regular Beacon HW v4.9 in several ways:

  • The Mini-RX is an RX-only beacon, i.e. it can receive, but it cannot transmit ultrasonic signal
  • The fact that it is RX-only makes it far more sensitive, i.e. you will get a longer range between Beacon HW v4.9 and the Mini-RX than between Beacon HW v4.9 and Beacon HW v4.9
  • The Mini-RX beacon can receive any ultrasonic frequency from the bands: 19kHz, 25kHz, 31kHz, 37kHz, 45kHz. The filter can be simply selected in the Dashboard. At the same time, the ultrasonic frequency of Beacon HW v4.9 is HW-defined by ultrasonic sensors and can’t be changed
  • The Mini-RX beacon can receive several ultrasonic frequencies at once. That is used in Inverse Architecture. See the comparison
  • The Mini-RX Beacon is significantly smaller, than Beacon HW v4.9 in volume and weight. See the Beacons Comparison table
  • The Mini-RX Beacon can work with regular Beacons HW v4.9 in any combination as a part of a Starter Set or as a part of navigation systems and it is a superior RX-only replacement to HW v4.9. At the same time, since it is RX-only beacon, the Beacons HW v4.9 are here to stay as universal dual-use beacons

This sales item is shipped using Shipping & Handling fee (Complexity I).

Distance between beacons

  • Reach up to 50 meters in lab conditions
  • Recommended distance is 30 meters (Transducer4 of Beacon HW v4.9 looking straight at Mini-RX)
  • Range of stable tracking of Mini-RX + Beacon HW v4.9 is 20-50% bigger, than the range of Beacon HW v4.9 + Beacon HW v4.9 in the same conditions

Coverage area

  • Reach up to 1000 m2 with the Starter Set configurations
  • Coverage for larger territories is similar to cellular networks

Location precision

  • Absolute: 1–3% of the distance to the beacons
  • Differential precision: ±2 cm
  • Differential precision is on par or better than in the Beacon HW v4.9, partially, because the sensor is a point – not as spread sensors of HW v4.9; and, partially, because of higher processing power and more advanced algorithms of the Mini-RX

Location update rate

Non-Inverse Architecture:

  • 0.05–25Hz
  • Can be set manually or in automatic mode
  • Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)
  • Depends on the number of mobile beacons: for example, update rate of 25Hz for 1 mobile beacon will result in update rate of 25Hz/2 for 2 mobile beacons, and 25Hz/3 – for 3 mobile beacons, etc. – TDMA approach
  • Depends on the radio interface profile (500kbps vs. 38kbps)

 

Inverse Architecture:

  • 0.05–25Hz. With IMU fusion enabled – up to 100Hz
  • Can be set manually or in automatic mode
  • Depends on the distance between the mobile and stationary beacons (shorter distance — higher update rate)
  • Doesn’t directly depend on the number of mobile beacons – all of them are receiving
  • Depends on the radio interface profile (500kbps vs. 38kbps)

Power supply and battery lifetime

Internal:

  • LiPol battery 750mAh
  • Battery lifetime totally depends on usage
  • Stationary beacon with 8Hz update rate => up to 30h
  • Stationary beacon with 1Hz update rate => 1 week
  • Future power saving features may increase battery life to 1year and more

External:

  • microUSB – recommended for permanent use

Weight

  • 35g (board + battery + plastic housing)

Size

47x42x15mm

No customer reviews for the moment.

16 other products in the same category:

A1 Motor

A1 Motor Stable and efficient, easy to maintain   FUNCTION PARAMETER  Maximum Torque 33.5N.m Weight about 605g Operating Voltage 12~30V (Recommended Voltage:24V) Maximum Current 40A...

Quick view More info

AlienGo Battery

AlienGo Battery Power your robot   2020 NEW UPGRADE Special battery forhigh-performance quadruped robot   Battery Parameters Product model: AL01-BTO1 Battery type: Polymer lithium ion...

Quick view More info

SPOT BATTERY

SPOT Battery Additional Spot Battery    WHAT'S INCLUDED • Spot battery   SPECS Length = 324 mm (12.8 in) Width = 168 mm (6.6 in) Height = 93 mm (3.7 in) Weight = 4.2 kg (9.3 lbs) Capacity...

Quick view More info

+ AWARENESS (SPOT)

+ Awareness for SPOT Spot CAM provides a color panoramic view of the robot's surroundings and communication capabilities enabling an improved teleoperation experience.   PRODUCT HIGHLIGHTS The...

Quick view More info

Beacon HW v4.9-IMU

Description Not for new design. We are shipping out the last beacons from the last batch. The Beacons HW v4.9 are replaced with Super-Beacons. Beacon HW v4.9 with 9D IMU onboard...

zł1,003.38 Tax included
Quick view More info

Starter Set NIA-SmallDrone

Description Starter Set NIA-SmallDrone is designed for tracking mini- and micro-drones (under 100g) indoor. It is suitable for larger and autonomous drones as well. Content: 4 x...

zł4,179.74 Tax included
Quick view More info

+ EDGE GPU (SPOT)

+ Edge GPU for SPOT Spot CORE AI provides advanced processing for applications requiring on-robot computation.   PRODUCT HIGHLIGHTS The Spot CORE AI is a complete development environment for...

Quick view More info

+ LIDAR (SPOT)

+ Lidar for SPOT Spot EAP enhances the range and accuracy of Spot’s autonomy system for use on large sites.   PRODUCT HIGHLIGHTS The Spot EAP (Enhanced Autonomy Package) improves Spot’s autonomy...

Quick view More info

+ INSPECTION (SPOT)

+ Inspection for SPOT Spot CAM+ adds a pan-tilt-zoom (PTZ) camera to the Spot CAM to enable detailed inspections.   PRODUCT HIGHLIGHTS The Spot CAM+ payload turns Spot into a powerful inspection...

Quick view More info

SPOT CARE

SPOT Care Premium service plan, providing one year of extended coverage and expedited repair.   PRODUCT HIGHLIGHTS Spot CARE minimizes your downtime and maximizes your productivity with Spot. Our...

Quick view More info

+ EDGE CPU (SPOT)

+ Edge CPU for SPOT Spot CORE provides dedicated processing for applications requiring on-robot computation.   PRODUCT HIGHLIGHTS The Spot CORE is an additional processor for developers to run...

Quick view More info

A1 Battery

A1 Battery Power your robot   High-Performance RobotDedicated BatteryGreater Current And Power, More Reliable And Safer, Smarter BMS   Battery Parameters Product: Al Robot Dedicated...

Quick view More info

Modem HW v4.9

Description Not for a new design. We are shipping out the last modems from the last batch. The Modems HW v4.9 are replaced with Modem HW v5.1.   Modem is a central controller of the...

zł649.14 Tax included
Quick view More info