Starter Set NIA-SmallDrone is designed for tracking mini- and micro-drones (under 100g) indoor. It is suitable for larger and autonomous drones as well.
1 x Beacon Mini-TX 915/868 MHz as mobile beacon – for event lighter version, we recommend to remove the housing and replace the original battery with a light 100mAh battery. The minimum weight that we achieved was 8.7g
The set is suitable for different use cases, but, most of all, it is designed for precise (±2cm) indoor tracking of small and light drones (under 100g) in area of up to 400-500 m2. Of course, it would work with heavier drones as well.
For more area coverage – by adding more stationary Super-Beacons
For more drones – by adding more mobile beacons Mini-TX
Marvelmind Indoor Navigation System is an off-the-shelf indoor navigation system designed to provide precise (±2cm) location data to autonomous robots, vehicles (AGV), drones and forklifts. It can also be used to track other objects that the mobile beacon is installed upon, for example, virtual reality (VR) systems, helmets for construction workers or miners, jackets, etc.
The navigation system is based on stationary ultrasonic beacons that are united by radio interface in a license-free band (915MHz). The location of the mobile beacon is calculated based on the propagation delay of an ultrasonic signal (Time-Of-Flight or TOF) to a set of stationary ultrasonic beacons using trilateration.
Key requirements for the system to function properly:
For 3D (X, Y, Z) tracking – An unobstructed line of hearing/sight by a mobile beacon to three or more stationary beacons simultaneously
Distance to the nearest 3 beacons – not more than 20 meters (recommended). In good conditions – up to 30 meters – for Mini-TX & Super-Beacon combination
No customer reviews for the moment.
error
Your review appreciation cannot be sent
feedback
Report comment
Are you sure that you want to report this comment?
check_circle
Report sent
Your report has been submitted and will be considered by a moderator.
error
Your report cannot be sent
Write your review
check_circle
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Description
Not for new design. We are shipping out the last beacons from the last batch. The Beacons HW v4.9 are replaced with Super-Beacons.
Beacon HW v4.9 with 9D IMU onboard...
SPOT Care
Premium service plan, providing one year of extended coverage and expedited repair.
PRODUCT HIGHLIGHTS
Spot CARE minimizes your downtime and maximizes your productivity with Spot. Our...
A1 Motor
Stable and efficient, easy to maintain
FUNCTION
PARAMETER
Maximum Torque
33.5N.m
Weight
about 605g
Operating Voltage
12~30V (Recommended Voltage:24V)
Maximum Current
40A...
Description
Outdoor version of the Mini-RX beacon. Electronics is fully compound-sealed. Ultrasonic sensor is protected by special IP67 membrane. Reset button is sealed and not available. USB...
Description
Starter Set HW v4.9 is a precise indoor positioning and navigation solution for various applications including autonomous robots, autonomous drones, autonomous vehicles. It also works...
+ Inspection for SPOT
Spot CAM+ adds a pan-tilt-zoom (PTZ) camera to the Spot CAM to enable detailed inspections.
PRODUCT HIGHLIGHTS
The Spot CAM+ payload turns Spot into a powerful inspection...
+ Edge CPU for SPOT
Spot CORE provides dedicated processing for applications requiring on-robot computation.
PRODUCT HIGHLIGHTS
The Spot CORE is an additional processor for developers to run...
A1 Battery
Power your robot
High-Performance RobotDedicated BatteryGreater Current And Power, More Reliable And Safer, Smarter BMS
Battery Parameters
Product: Al Robot Dedicated...
+ Edge GPU for SPOT
Spot CORE AI provides advanced processing for applications requiring on-robot computation.
PRODUCT HIGHLIGHTS
The Spot CORE AI is a complete development environment for...
+ Lidar for SPOT
Spot EAP enhances the range and accuracy of Spot’s autonomy system for use on large sites.
PRODUCT HIGHLIGHTS
The Spot EAP (Enhanced Autonomy Package) improves Spot’s autonomy...
Description
Beacon Mini-TX a mini version of regular Beacon HW v4.9 with IMU
Has 6D IMU onboard: 3D accelerometer + 3D gyroscope
Comparison to Beacon HW v4.9:
TX-only beacon – can transmit...
error Your review appreciation cannot be sent